Elphinstone WR810 Delivery with crane

Reliable transport and day-to-day heavy lifting

With a payload of 11,130 kilograms, the new WR810 Delivery with crane ensures parts, components, equipment, and maintenance personnel are transported safely and securely throughout the mine.

The fully integrated Hiab X-HiDuo 092 ‘optimal performance’ loader crane features a rated lifting capacity of 8.8 tonne metre (TM) and a 7.7-metre outreach, providing a reliable solution for day-to-day heavy lifting.

Manual or Wireless Operation

Operated by manual lever control or via the wireless joystick remote, the operator can manoeuvre loads from a distance with built-in intelligence and automatic speed control (ASC) for safe and effective load handling.

Safety Features

Safety features include emergency crane stops located on the manual control station and wireless joystick remote. Stabiliser legs with levelling sensors provide a safe foundation with easy pack up for safe transit. The checker plate deck features thoughtfully positioned tie-down points and three-point access with high visibility green handrails and ladders on both sides.

Other safety features include firewalls and heatshields, machine interlocks, centralised isolation points (engine disconnect switch, starter isolation switch, jump-start receptacle and fire system activation, if fitted). Optional features include an integrated fire suppression system and metallic fuel water separators made from a non-flammable material.

Ground Level Emergency Stops

Emergency stops are fitted as standard inside the cabin, at ground level on the front left-hand side of the machine and located near the access ladders on the left- and right-hand side of the deck.

Tier 3 and Tier 4 Final Engine Arrangements

The C7.1 ACERT Tier 4 Final engine arrangement is optional, adhering to EU Stage V exhaust emission standards. The engine arrangement offers a dual horsepower configuration set at 151 kilowatts (202 horsepower) for a higher performance rating.

The lower reduced ventilation rating at 129 kilowatts (173 horsepower) is possible through a simple software change performed by a Caterpillar dealer.

The C7.1 ACERT Tier 3 engine arrangement rated at 168 kilowatts (225hp) is the standard option for less stringent emission regulations. Matched to the engine is a Cat five-speed (three-speed reverse) transmission fitted with a lock-up torque converter.

Operator Station

Integrated into the WR810 operator station is a ROPS (roll-over protective structure) ISO 3471:2008 and FOPS (falling object protective structure) ISO 3449:2005 that offers protection to the operator.
The operator station is designed to seat three people in comfort with exceptional visibility. This is ideal for training purposes, and allows the complete crew to travel collectively rather than deploying an additional light vehicle for personnel transport.
The driver’s seat is a ‘T’ seat with air suspension, and the crew seats are a standard ‘T’ seat or optional ‘T’ seat with air suspension.
Ergonomically designed machine controls are located for the operator to control the machine functions with minimal effort. The result is greater concentration on vehicle operation, with reduced operator fatigue.

Specification Snapshot
  • GVM* 28,760 kg
  • Maximum Payload 11,130 kg
  • HIAB Crane Rated Lift Capacity 8.8 TM
  • Crane Outreach 7.7 m
  • Engine model Cat C7.1 ACERT™ TIER 3 (Standard)
  • Gross power SAE J1995 168 kW / 228 hp (Cat C7.1 ACERT TIER 3)
  • Articulation 42.5 degrees
  • Tyres 14.00R20
  • Stabiliser Legs with Levelling Sensors
  • Manual Lever Control or Wireless Joystick Remote for Crane;

*GVM dependent on product configuration.

Elphinstone WR810 Series

The WR810 is the smaller of Elphinstone's two purpose built base support platforms.  Available in forward or centre mount cab configuration, the WR810 features an integrated Caterpillar powertrain delivering optimum performance and reliability in tough underground conditions.

ACERT™ Technology Caterpillar optimizes engine performance while meeting EPA Tier 3 regulations. ACERT™ Technology reduces emissions during the combustion process by using advanced technology in the air and fuel systems, in conjunction with  integrated electronics. The Caterpillar engine meets emission regulations at the combustion source rather than recycling exhaust gases.

The C7.1 ACERT Tier 4 Final engine arrangement is optional, adhering to EU Stage V exhaust emission standards. The engine arrangement offers a dual horsepower configuration set at 151 kilowatts (202 horsepower) for a higher performance rating.

 

C11 ACERT EngineCat C7.1 Engine

The Cat C7.1 uses Caterpillar's breakthrough ACERT™ Technology to meet exhaust emission reduction standards. It features efficient fuel delivery, air management and electronic control for high productivity and exceptional service life.

The four-stroke engine provides efficient fuel combustion. Precise engineering and thorough testing assure durability, reliability and power. Built-in serviceability and excellent fuel economy lower operating costs.

Cat Five Speed TransmissionCat Five-Speed Transmission

The field proven Caterpillar power shift countershaft transmission easily matches engine power to the load size and ground conditions. Electronic control makes fingertip controls possible, reducing operator fatigue and improving comfort.

Gear Application Gear ratios are designed to maximise productivity in specific cycle segments: Gear 1 provides highest rimpull capability for heavy load applications;  Gear 2 and 3 for normal loads and higher speed operations; Gear 4 and 5 provide excellent empty return and roading speeds.

WR810 Tier 3 Underground Water Cannon

WR810 Underground Water Cannon dispatched to Westrac

Elphinstone are very pleased to be delivering a WR810 Underground Water Cannon to WesTrac in Western Australia which will be introduced to the Goldfields.

The Elphinstone WR810 Water Cannon is a dual application machine. A wireless controller and base station allows the operator to position the 8m telescopic boom for washing down valuable ore fines or high-pressure blasting of material blockages from a safe remote location. The side and rear water sprays are for dust suppression of haul roads and are controlled from the operators cabin.

This machine features some impressive options including a proven Caterpillar power train, all-wheel drive, hydraulic front suspension, oscillating hitch, heavy-duty axles, automatic lubrication, mine water supply connection, automatic boom pack up and much more. The fire suppression system is cleverly hidden away and protected inside the rear tank.

Machines in Stock

Elphinstone UG20K Motor Grader

Machine Configuration:

  • Caterpillar C7 Tier 2 engine
  • Enclosed climate controlled operator cabin
  • Shortened wheelbase
  • Reverse camera
  • DPF exhaust
  • Reduced width moldboard

*Machine pictured depicts model only.

Railmax RMT15F Road Rail Excavator wheels up
Railmax RMT15F High Rail Excavator

Machine Configuration:

  • Caterpillar C4.4 Tier 4 final engine
  • Certified ROPS / FOPS structure
  • 3m Stick arrangment
  • Standard gauge rail undercarriage
  • Rototilt hydraulic tilt-rotator & quick coupler
  • Elphinstone RCC (Rated Capacity Controller)

*Machine pictured depicts model only.

Elphinstone WR820 Water Tank

Machine Configuration:

  • Caterpillar C11 Tier 3 engine
  • Enclosed climate controlled operator cabin
  • High speed fluid changes
  • Reverse camera
  • DPF exhaust
  • Air suspension seat

*Machine pictured depicts model only.

Elphinstone WR810 Agitator 6m3

Machine Configuration:

  • Caterpillar C7.1 tier 3 engine
  • 3 Person enclosed climate controlled cabin
  • Fire suppression system
  • Automactic lubrication system
  • External water supply washdown system
  • Air Suspension seating (3 seats)

*Machine pictured depicts model only.

Elphinstone WR810 Scissor Lift

Machine Configuration:

  • Caterpillar C7.1 tier 3 engine
  • 3 Person enclosed climate controlled cabin
  • Fire suppression system
  • Automactic lubrication system
  • Reverse camera
  • Air Suspension seating (3 seats)

*Machine pictured depicts model only.

Elphinstone UG20M Grader

Elphinstone UG20M Motor Grader

Machine Configuration:

  • Caterpillar C7.1 Tier 4 interim engine
  • Enclosed climate controlled operator cabin
  • Shortened wheelbase
  • Reverse camera
  • DPF exhuast
  • Secondary steering

*Machine pictured depicts model only.

Elphinstone WR820 Agitator 10m3

Machine Configuration:

  • Caterpillar C11 Tier 3 engine
  • Enclosed climate controlled operator cabin
  • On board Wash down system
  • Reverse camera
  • DPF exhaust
  • Secondary steering

*Machine pictured depicts model only.

Elphinstone UG20K Grader

Elphinstone UG20K Motor Grader

Machine Configuration:

  • Caterpillar C7 Tier 2 engine
  • Enclosed climate controlled operator cabin
  • Shortened wheelbase
  • Reverse camera
  • DPF exhuast
  • Reduced width moldboard

*Machine pictured depicts model only.

Elphinstone WR820 Agitator 10m3

Elphinstone WR820 Agitator 10m3

Machine Configuration:

  • Caterpillar C11 Tier 3 engine
  • Enclosed climate controlled operator cabin
  • On board Wash down system
  • Reverse camera
  • DPF exhuast
  • Secondary steering

*Machine pictured depicts model only.

Elphinstone WR820 Water Tank

Elphinstone WR820 Water Tank

Machine Configuration:

  • Caterpillar C11 Tier 3 engine
  • Enclosed climate controlled operator cabin
  • High speed fluid changes
  • Reverse camera
  • DPF exhuast
  • Air suspension seat

*Machine pictured depicts model only.

Downloads

WR810 Delivery with Crane

WR810 Agitator 6m³

WR810 Water Cannon

WR810 Fuel & Lube

WR810 Scissor Lift

WR820 Agitator 10m³

WR820 Agitator 8m³

WR820 Water Tank

UG20M Motor Grader

UG20K Motor Grader

Railmax RMT15F Road Rail Excavator wheels up

Railmax RMT15F

3900 Haulmax Series

Product Overview Brochure

Positions Vacant

Sorry, no positions vacant at this time.

Submit your Resume

To make an enquiry relating to a vacant position or to attach your resume, select 'Positions Vacant' in the subject choice dropdown section to reveal the 'Attach a file' option.

Fill out my online form.

FIND OUT MORE - SEEK.COM
FIND OUT MORE - SEEK.COM
FIND OUT MORE - SEEK.COM
FIND OUT MORE - SEEK.COM
FIND OUT MORE - SEEK.COM

Elphinstone Underground Graders

Motor Graders - K Series

The Elphinstone UG20K Underground Motor Grader utilises the Cat® 120K2 base machine with custom modifications designed for underground conditions. Offering multiple cab configurations, the UG20K offers a safe, comfortable and efficient solution for your underground road maintenance.

Motor Graders - M Series

The Elphinstone UG20M Underground Motor Grader utilises the Cat® 120M2 (Tier 4) base machine. The UG20M grader has all the modern features of the M series Motor Grader, but is modified by Elphinstone specifically for underground mining.

Elphinstone UG20K Motor Grader

  • GVM* 15,000 kg
  • Engine model Cat C7 ACERT™
  • Gross power SAE J1995 108 kW / 145 hp
  • Frame articulation left/right 20 degrees
  • Steering range left/right 47.5 degrees
  • Turning circle inner/outer 60/227” 1524 / 5766 mm
  • Overall length (shortened spine) 26 ft 0.2 in 7930 mm
  • Width over front tyres 96.4” 2449 mm
  • Tyres 14.00 x 24 Triangle 12 ply E2 Tubeless

*Approximate only. GVM dependent on product configuration

Elphinstone UG20M Motor Grader

  • GVM* 18,000 kg
  • Engine model Cat C7.1 ACERT™
  • Gross power SAE J1995 108-141kW / 145 - 189 hp
  • Frame articulation left/right 20 degrees
  • Steering range left/right 47.5 degrees
  • Turning circle inner/outer (shortened wheelbase) 63/235” 1600 / 5969 mm
  • Overall length (shortened wheelbase) 28 ft 3.4 in 8620 mm
  • Width over front tyres 98.9” 2511 mm
  • Tyres 14.00R24 Bridgestone VUT * L2 Tubeless

*Approximate only. GVM dependent on product configuration

Elphinstone WR810 Series

Elphinstone WR810 Delivery with Crane

  • GVM* 28,760 kg
  • Maximum Payload 11,130 kg
  • HIAB Crane Rated Lift Capacity 8.8 TM
  • Crane Outreach 7.7 m
  • Engine model Cat C7.1 ACERT™ TIER 3 (Standard)
  • Gross power SAE J1995 168 kW / 228 hp (Cat C7.1 ACERT TIER 3)
  • Articulation 42.5 degrees
  • Tyres 14.00R20
  • Stabiliser Legs with Levelling Sensors
  • Manual Lever Control or;
  • Wireless Joystick Remote for Crane

*GVM dependent on product configuration.

Elphinstone WR810 Water Cannon

  • GVM* 28,660 kg
  • Water Tank Volume 8000 L
  • Monocoque chassis for increased mass centralisation
  • Dust Suppression Road Spray System
  • Engine model Cat C7.1 ACERT™ TIER 3 (Standard)
  • Gross power SAE J1995 168 kW / 228 hp (Cat C7.1 ACERT TIER 3)
  • Articulation 42.5 degrees
  • Tyres 14.00R20
  • Water pressure approx. 150psi
  • Water flow approx. 2,700 L/min
  • Water cannon nozzle size 38 mm (1½ in)

*GVM dependent on product configuration

Elphinstone WR810 Fuel & Lube

  • GVM* 24,750 kg
  • Diesel Tank Capacity 5000 L
  • 4 x 300 L Oil Tanks
  • 44 gallon drum storage with 2 point lash down device
  • Engine model Cat C7.1 ACERT TIER 3 (Standard)
  • Gross power SAE J1995 168kW / 228 hp (Cat C7.1 ACERT TIER 3)
  • Articulation 42.5 degrees
  • Tyres 14.00R20
  • Individual air operated oil pumps
  • Provision for additional 2x oil/coolant tanks if drums not required
  • Diesel tank isolation valve

*Approximate only. GVM dependent on product configuration

Elphinstone WR810 Agitator 6m3

  • GVM* 29,400 kg
  • Volume 6 m3
  • Plant mix mode agitator bowl speed 0-19 rpm
  • Transit mode agitator bowl speed 0-6 rpm
  • Engine model Cat C7.1 ACERT TIER 3 (Standard)
  • Gross power SAE J1995 168kW / 228 hp (Cat C7.1 ACERT TIER 3)
  • Articulation 42.5 degrees
  • Tyres 14.00R20
  • Digital slump meter reading in cab
  • Agitator bowl motor fitted with quick connect couplings
  • Agitator infinte bowl controls in cab and at rear of machine

*Approximate only. GVM dependent on product configuration

Elphinstone WR810 Scissor Lift

  • GVM* 23,400 kg
  • Rated capacity 5,000 kg AS1418.10 Group A, Type 1
  • Platform size 2,400 mm wide x 4,000 mm long
  • 17% machine levelling ability via cylinders
  • Engine model Cat C7.1 ACERT™ TIER 3 (Standard)
  • Gross power SAE J1995 168 kW / 228 hp (Cat C7.1 ACERT TIER 3)
  • Articulation 42.5 degrees
  • Tyres 14.00R20

*Approximate only. GVM dependent on product configuration

Elphinstone WR810 Series

The WR810 is the smaller of Elphinstone's two purpose built base support platforms.  Available in forward or centre mount cab configuration, the WR810 features an integrated Caterpillar powertrain delivering optimum performance and reliability in tough underground conditions.

ACERT™ Technology Caterpillar optimizes engine performance while meeting EPA Tier 3 regulations. ACERT™ Technology reduces emissions during the combustion process by using advanced technology in the air and fuel systems, in conjunction with  integrated electronics. The Caterpillar engine meets emission regulations at the combustion source rather than recycling exhaust gases.

C11 ACERT EngineCat C7.1 Engine

The Cat C7.1 uses Caterpillar's breakthrough ACERT™ Technology to meet exhaust emission reduction standards. It features efficient fuel delivery, air management and electronic control for high productivity and exceptional service life.

The four-stroke engine provides efficient fuel combustion. Precise engineering and thorough testing assure durability, reliability and power. Built-in serviceability and excellent fuel economy lower operating costs.

Cat Five Speed TransmissionCat Five-Speed Transmission

The field proven Caterpillar power shift countershaft transmission easily matches engine power to the load size and ground conditions. Electronic control makes fingertip controls possible, reducing operator fatigue and improving comfort.

Gear Application Gear ratios are designed to maximise productivity in specific cycle segments: Gear 1 provides highest rimpull capability for heavy load applications;  Gear 2 and 3 for normal loads and higher speed operations; Gear 4 and 5 provide excellent empty return and roading speeds.