

WR810 Agitator 7m3
- GVM* TBC
- Volume 7 m3
- Plant mix mode agitator bowl speed 0-19 rpm
- Transit mode agitator bowl speed 0-6 rpm
- Cat C7.1 ACERT TIER 3 Engine (Standard)
- Gross power SAE J1995 168kW / 228 hp
- Electromagnetic retarder and electronic speed control
- Articulation 42.5 degrees
- Tyres 16.00R20
*GVM dependent on product configuration

WR810 Agitator 6m3
- GVM* 29,400 kg
- Volume 6 m3
- Plant mix mode agitator bowl speed 0-19 rpm
- Transit mode agitator bowl speed 0-6 rpm
- Cat C7.1 ACERT TIER 3 Engine (Standard)
- Gross power SAE J1995 168kW / 228 hp
- Electromagnetic retarder and electronic speed control
- Articulation 42.5 degrees
- Tyres 14.00R20
*GVM dependent on product configuration

WR810 Delivery
- GVM* 28,760 kg
- Maximum Payload 11,130 kg
- HIAB Crane Rated Lift Capacity 8.8 TM
- Crane Outreach 7.7 m
- Stabiliser Legs with Levelling Sensors
- Manual Crane Lever Control or Wireless Joystick Remote
- Cat C7.1 ACERT™ TIER 3 Engine (Standard)
- Gross power SAE J1995 168 kW / 228 hp
- Electromagnetic retarder and electronic speed control
- Articulation 42.5 degrees
- Tyres 14.00R20
*GVM dependent on product configuration.

WR810 Flat Deck
- GVM* 30,000 kg
- Maximum Payload 15,000 kg
- 8 Pallet Capacity
- Transport parts and equipment throughout mine site
- Safe transport of 3x maintenance personnel
- Deck 2,490 mm x 4,800 mm
- Cat C7.1 ACERT™ TIER 3 Engine (Standard)
- Gross power SAE J1995 168 kW / 228 hp
- Electromagnetic retarder and electronic speed control
- Articulation 42.5 degrees
- Tyres 14.00R20
*GVM dependent on product configuration.

WR810 Water Cannon
- GVM* 28,660 kg
- Water Tank Volume 8000 L
- Dust Suppression Road Spray System
- Water pressure approx. 150psi / flow approx. 2,700 L/min
- Cat C7.1 ACERT™ TIER 3 Engine (Standard)
- Gross power SAE J1995 168 kW / 228 hp
- Electromagnetic retarder and electronic speed control
- Articulation 42.5 degrees
- Tyres 14.00R20
*GVM dependent on product configuration

WR810 Scissor Lift
- GVM* 23,400 kg
- Purpose-built underground elevated work platform
- Rated capacity 5,000 kg AS1418.10 Group A, Type 1
- Platform size 2,400 mm wide x 4,000 mm long
- 17% machine levelling ability via cylinders
- Cat C7.1 ACERT™ TIER 3 Engine (Standard)
- Gross power SAE J1995 168 kW / 228 hp
- Articulation 42.5 degrees
- Tyres 14.00R20
*GVM dependent on product configuration

WR810 Fuel & Lube
- GVM* 24,750 kg
- Diesel Tank Capacity 5000 L
- 4 x 300 L Oil Tanks
- 44-gallon drum storage with 2 point lash down device
- Cat C7.1 ACERT TIER 3 Engine (Standard)
- Gross power SAE J1995 168kW / 228 hp
- Electromagnetic retarder and electronic speed control
- Articulation 42.5 degrees
- Tyres 14.00R20
*GVM dependent on product configuration

WR810 Cab Chassis
- GVM* 31,000 kg
- Payload 16,970 kg
- Chassis Length (usable) 4,825 mm
- Chassis Height 1,100 mm
- Cat C7.1 ACERT™ TIER 3 Engine (Standard)
- Gross power SAE J1995 168 kW / 228 hp
- Electromagnetic retarder and electronic speed control
- Articulation 42.5 degrees
- Tyres 14.00R20
*GVM dependent on product configuration
Elphinstone WR810 Series
The WR810 is the smaller of Elphinstone's two purpose built base support platforms. Available in forward or centre mount cab configuration, the WR810 features an integrated Caterpillar powertrain delivering optimum performance and reliability in tough underground conditions.
ACERT™ Technology Caterpillar optimizes engine performance while meeting EPA Tier 3 regulations. ACERT™ Technology reduces emissions during the combustion process by using advanced technology in the air and fuel systems, in conjunction with integrated electronics. The Caterpillar engine meets emission regulations at the combustion source rather than recycling exhaust gases.
Cat C7.1 Tier 3 engine (Standard)
The C7.1 ACERT Tier 3 engine arrangement rated at 168 kilowatts (225 horsepower) is the standard option for less stringent emission regulations. Matched to the engine is a Cat five-speed (three-speed reverse) transmission fitted with a lock-up torque converter.
Downtime during service and maintenance is reduced through some clever engineering and design features. Quick change air filters and 500-hour oil service intervals also reduce downtime and keep machines in operation for longer for greater productivity. The on-board warning & protection system continuously checks all critical machine functions for early warning and fast fault finding, recorded for analysis.
Cat C7.1 Tier 4 Final engine (Optional)
The C7.1 ACERT Tier 4 Final engine arrangement is optional, adhering to EU Stage V exhaust emission standards. The engine arrangement offers a dual horsepower configuration set at 151 kilowatts (202 horsepower) for a higher performance rating. The lower reduced ventilation rating at 129 kilowatts (173 horsepower) is possible through a simple software change performed by a Caterpillar dealer.
Cat Five-Speed Transmission
The field proven Caterpillar power shift countershaft transmission easily matches engine power to the load size and ground conditions. Electronic control makes fingertip controls possible, reducing operator fatigue and improving comfort.
Gear Application Gear ratios are designed to maximise productivity in specific cycle segments: Gear 1 provides highest rimpull capability for heavy load applications; Gear 2 and 3 for normal loads and higher speed operations; Gear 4 and 5 provide excellent empty return and roading speeds.